Sunbolt charging stations can charge a smartphone at the same rate as a typical 120V AC outlet.
With a full battery and depending on the model, it can charge between 50-150 smartphones with battery capacity in the… Read more »
Yes. Sunbolt products are available in fully ADA accessible configurations.
The duration that a battery will continue to provide available power to charge devices is a function of battery capacity,… Read more »
Our workstation, stand-up and solar carousel lines all come with solar panels. We offer companion tables that do not come… Read more »
Ipe wood requires periodic oiling. The frequency is dictated by the local climate, but once or twice a year should… Read more »
To clean or remove dirt and debris use a mild solution of soap and water. Mild off-the-shelf cleaners (Simple Green,… Read more »
To clean or remove dirt and debris, use a mild solution of soap and water. Mild off-the-shelf cleaners (Simple Green,… Read more »
Depending on local conditions, periodically inspect and clean the surface of the solar modules with water and a soft cloth… Read more »
We assemble all of our units in the United States. The components used in our products are sourced from a… Read more »
Yes, we use sustainable products including steel which is recyclable, wood which is recyclable and biodegradable, and recycled plastic lumber.
The Velocity Solar Workstation is offered with gray recycled plastic lumber. You can choose recycled plastic lumber for the CampusXL… Read more »
Yes. Please inform your Sunbolt representative if you would prefer the recycled plastic lumber. This option is not recommended for… Read more »
The CampusXL Solar Workstation is constructed with structural steel, which is powder-coated in your choice of color. The table and… Read more »
Most of our products include standard or optional Bluetooth or wireless-enabled capabilities to report current charging state and cumulative charging… Read more »
All of our products can include an optional circuit and waterproof enclosure to add a (wireless) hotspot. Customers must purchase… Read more »
We consider custom modifications on a case-by-case basis.
1,500 lbs (additional 275+lbs per bench)
1,813 lbs. (additional 400+lbs per bench)
1,450 lbs. (including electrical components and concrete ballast block)
The map on our homepage showcases many of our installation locations. You can also reach out to a Sunbolt representative… Read more »
The CampusXL, Momentum and Velocity Solar Workstations are fixed at 7° southern or eastern facing.
There are a number of factors that affect the “autonomy” of a charging station. Some factors include battery capacity, type… Read more »
Yes. The Solar Workstations are fully equipped to charge laptops.
6 of direct sunlight
Footers can easily be installed using 12″ sonotubes at all mounting locations. https://www.sonotube.com/sonotubeconcreteforms.aspx
We recommend Hilti KWIK HUS (or comparable) screw anchors for concrete and masonry, and helical anchors for other surfaces.
The Solar Workstations can be anchored; however, it is not necessary to do so. The Solar Carousels and Solar Stand-up… Read more »
The ideal conditions for the site pad should consider the following: The site surface should be high-quality permeable, or impermeable… Read more »
The Solar Workstations and Solar Stand-ups are delivered fully assembled. When shipped overseas, Solar Workstations may be shipped with the… Read more »
The Solar Workstations come fully assembled. A forklift, forklift extensions and pallet jack are required to unload it.
Yes, if the facilities or grounds team feels comfortable placing the units directly on grass.
Two people for the CampusXL, Momentum, or Velocity.
Typically, the customer handles installation using a facilities department representative or a contractor. If the customer does not have the… Read more »
No. Solar Workstations are delivered fully assembled.
The specifications for each of our products includes dimensions for the footprint of the table and seating. These dimensions should… Read more »
Our solar canopies will sustain a significant amount of snow loading. If heavy accumulated snow persists for many days, it… Read more »
Most of the snow slides off the “slippery” panels or through the perforations in the parasol. Any significant accumulating snow… Read more »
Although there will be some PV absorption by the solar panels during a snowstorm, any significant accumulating snow can easily… Read more »
The Solar Workstations, as with all of our units, are able to withstand snowy conditions. A light dusting of snow… Read more »
Various solar panel manufacturers are used based on product availability and market conditions.
We use security hardware on all parts that are exposed on our solar units. Tables and benches can be anchored… Read more »
Yes, you can add a logo to all of our solar units for an additional cost.
Yes. We can send samples.
Yes. If you know the color you’d like, please send the number to your Sunbolt representative to check if we… Read more »
One standard color is included in the price. If you choose to customize the workstation in two or more colors, there… Read more »
Yes. You can choose a powder coat color. Please contact your Sunbolt representative for the color chart.