Explorer 200 Off-Grid Solar Kit for RV, Trailers, Boats
The Explorer 200 offers the freedom to be off the grid but fully connected with convenient power production when you need it.
This is an all-inclusive solar kit that provides clean power for your trailers, RV, boat, or home. The system features two (2) 100W solar modules, 20A MPPT charge controller, 1000W inverter and 100Ah battery.
The inverter includes two (2) convenient 120VAC outlets and one (1) 2.1A 5V USB charging port.
Pre-order: Expected ship date no later than 9/1/2020.
|Dimensions||48 × 48 × 48 in|
|PV MODULES||Eco-Worthy 100W MS|
|Nominal Max. Power (PMAX)||100W|
|Opt. Operating Voltage (VMP)||18.0V|
|Opt. Operating Current (IMP)||5.55A|
|Open Circuit Voltage (VOC)||21.6V|
|Short Circuit Current (ISC)||6.11A|
|Operating Temperature||-40°C to +80°C|
|Dimensions||39.80 x 20.10 x 1.40in
1010.00 x 510.00 x 35.00mm
|CHARGE CONTROLLER||Renogy RVR-20|
|Nominal System Voltage||12V/24V Auto Recognition|
|Rated Battery Current||20A|
|Rated Load Current||20A|
|Max. Battery Voltage||32V|
|Max. Solar Input Voltage||100VDC|
|Max. Solar Input Power||12V @ 260W
24V @ 520W
|Self-Consumption||≤100mA @ 12V
≤58mA @ 24V
|Charge Circuit Voltage Drop||≤0.28V|
|Discharge Circuit Voltage Drop||≤0.15V|
|Temp. Compensation||-3mV/°C/2V (default)|
|Dimensions||8.27 x 5.94 x 2.34in
210.00 x 151.00 x 59.50mm
|Frequency||60Hz (Pure Sine Wave)|
|AC Output Sockets||2|
|USB Power Port||5V/2.1A|
|Dimensions||13.0 x 7.0 x 3.0 in
330 x 178 x 76 mm
|BATTERY||Bright Way BW 121000Z|
|Dimensions||12.1 x 6.66 x 8.31 in
306 x 169 x 211mm
See the warranty documentation included with each of the components included in the Solar Kit.
Following are the warranties for the major components included in the Solar Kit:
SOLAR PANEL – 25 Years solar power output
CHARGE CONTROLLER – 1 Year material and workmanship
INVERTER – 1 Year material and workmanship
BATTERY – 1 Year
In most cases, installation of our off-grid solar kits will not require a permit from your local authority having jurisdiction (AHJ). However, kits which are installed on building structures may require a permit or additional precautions (such as arc fault protection) to insure the system is designed and installed according to local code. Building and electrical codes vary by jurisdiction, so check with your AHJ to be certain your installation is in compliance.
Be sure to follow National Electrical Code (NEC) guidelines for your State